User's Manual

work for the Daisy program. If you push the audio mode switch to the

right side, the Voice Sense QWERTY will say “media mode” and the

audio buttons will work for the Media program.

So in order to use the audio buttons as you desire, you have to set the

audio mode switch to the proper position. For example, when you are

using Media program and the audio mode switch is located in the left

side, the audio buttons on the front panel will work for FM radio program.

The detailed function of the audio buttons will be explained in the FM

radio, Daisy and Media program sections in this user manual.

2.5 Switching Key lock

You can disable or enable any specified keys on the Voice Sense

QWERTY by using Key Lock switch on the front panel.

If the key lock switch put on left, Voice Sense QWERTY will say “all keys

locked.” In this case, you can’t use the all keys including the on/off

switch. If the key lock switch put on center, Voice Sense QWERTY will

say “top panel locked.” In this case, only you can use the buttons and

switches in the front panel (audio mode switch, audio buttons and power

switch). If the key lock switch put on right, Voice Sense QWERTY will

say “unlocked”. In this case, you can use the all keys (audio buttons,

function keys, audio mode switch and power switch).

But, you can use the reset button, regardless of location of key lock

switch.

2.6 Execute and Exit Program

You can execute program by pressing the “Enter” button. If you want to

cancel the execution of any command, and return to the previous status,

press “Alt-F4”. “Alt-F4” indicates that the user should press the “Alt” and

“F4” simultaneously and then release them at the same time. “Alt-F4” is

a very important command to remember, as it will allow you to back out

of programs and menus, when you may have pressed keys that you did

not mean to press.