User's Manual

364
If you want to access to Internet with the Voice Sense QWERTY, you
must set the Internet settings at “Setup internet” that is one of the
submenus of “Utilities” menu.
Or, if the PC in which the Active Sync program is installed is connected
to Internet and the Voice Sense QWERTY is connected to that PC, then
you can connect the Voice Sense QWERTY to Internet.
The functions of this menu are explained in greater detail in the following
sections.
17.9.2 LAN Setup
If you are going to set up a LAN, you should first connect a LAN cable to
the Voice Sense QWERTY. In this setup, you can decide whether you
will use the automatic or manual setup to setup your IP configuration. If
you want to set it up automatically, press “Enter” on “Setup IP:
Automatic.” Then, it will be set up automatically. For the automatic setup,
your host server should provide DHCP service (Dynamic Host
Configuration Protocol).
If you want to set up your IP configuration manually, move to “Manual”
by pressing “Down arrow key”from the “setup IP: Automatic,” and press
“Enter.” Then, you will find the following: “IP,” “Subnet mask,” “Gateway,”
and “Primary DNS.” These settings require specific information. Please
contact your Internet service provider for the right information. And after
typing in the information, you can move to the next item by pressing
“Down arrow key”. Finally after completing the “Primary DNS,” press
“Enter.” Then, you will see the message “setting completed.” You will be
returned to “Setup internet” with your information saved. You can then
use E-mail, MSN messenger or the Web browser.
17.9.3 Wireless LAN
If you want to connect to a wireless network, you should use the “setup
wireless LAN” function. In order to use the “setup wireless LAN” function,
you must change the wireless option to “On” in the option menu.