User's Manual

40
3.25 Announce shortcut keys
The “Announce shortcut keys” option allows you to decide if the Voice
Sense QWERTY will say the shortcut key for a function. The shortcut
key is “s” and the default is set to “On.” For example, if you hear, “File (f)
pull down,” the shortcut key is the letter “f.” If you prefer the Voice Sense
QWERTY only says, “File pull down,” you will want to turn the
“Announce shortcut keys” setting off. To toggle “Announce shortcut
keys” between on and off, press “Space.”
If you have changed the setting, press the “Enter” to save the setting.
You can also “tab”or “shift-tab”to the “Confirm” button, and press “Enter.”
If you do not want to save the setting, “tab”or “shift-tab”to the “Cancel”
button, and then press “Enter.” You can also cancel saving the setting by
pressing “Alt-F4” or “ESC.”
3.26 Power Saving Mode
You can choose to have the Voice Sense QWERTY use the power
saving mode. The shortcut key is “p”. The default setting is set to “On,”
which will use the power saving mode. The setting valuesswitch
between “On”,“Off”, and “Message”, using “Space”. If you don't want to
use the power saving mode, you can set the option to “Off.” If you set
the option to “Message,” you will hear a warning message that says
“power on” in 10, 20, or 30 minute increments (depending on the setting
that you will choose for power saving kick in) if you have not pressed
any keys on the Voice Sense QWERTY. The next section explains how
to change the power saving kick in to 10, 20, or 30 minutes. If you have
changed the setting, press the “Enter” to save the setting. You can also
“tab”or “shift-tab” to the “Confirm” button, and press “Enter.” If you do not
want to save the setting, “tab”or “shift-tab”to the “Cancel” button, and
then press “Enter.” You can also cancel saving the setting by pressing
“Alt-F4” or “ESC.”
For your reference, this option is available only when the AC adaptor is
connected to the unit. In other word, although you set the option to “On”