GETTING STARTED Digital Care Program Knee Pathway 1
THE HINGE HEALTH KIT In your Hinge Health kit you will find: • 1 Tablet with the Hinge Health app installed • 1 Tablet stand • 1 Tablet charger • 2 Knee motion sensors with straps • 1 Y-Cable sensor charger • 3 Resistance bands WAIT A SECOND Stretching and strengthening exercises are recommended by the American Orthopaedic Association. While it’s good to go through a full range of motion, only go as far you feel comfortable.
CONNECTING TO WI-FI The Hinge Health app needs to be connected to the Internet to work correctly. So, before you get started take a minute to set the tablet up on your home Wi-Fi network. 1. Tap on the Settings icon on the tablet home screen to take you into the tablet settings. 2. Tap on Wireless to access the Wi-Fi settings. 3. Tap on Wi-Fi to take you to a list of available networks. 4. Find your home network from the available list and select it. Enter your Wi-Fi password and tap Connect.
YOUR HINGE HEALTH SENSORS The wearable motion sensors included in your kit will help guide you through the exercise therapy program in the Hinge Health app. You will find instructions on using the sensors in the app. The light on each sensor has four different states: Flashing red means the battery is dead. To charge the sensors connect the Y-Cable sensor charger to the motion sensors and plug the main power plug into a wall socket. Flashing orange means the battery is charging.
HELP Should you need anything, don’t hesitate to: Message your coach in the app Call: (855) 902-2777 E-mail: help@hingehealth.
WEARABLE SENSOR REGULATORY INFORMATION Motion sensor model number, FCC ID (U.S) and IC (Canada) can be accessed within the Hinge Health mobile application by navigation to Settings > Legal > Regulatory. FCC This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.