Getting Started Guide
Flashing red means the battery is dead.
To charge the sensors connect the Y-Cable
sensor charger to the motion sensors and plug
the main power plug into a wall socket.
Flashing orange means the battery is charging.
Once connected to an outlet, the sensors
should start to flash orange.
White means the battery is fully charged.
This usually takes around two hours.
Green means the sensors are on and the
batteries have charge.
YOUR HINGE HEALTH SENSORS
The wearable motion sensors included in your kit will
help guide you through the exercise therapy program in
the Hinge Health app. You will find instructions on using
the sensors in the app.
The light on each sensor has four dierent states: