Installation Sheet

assembly instructions

Family: Bolla Item No. 2642

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Slip loop (1) along wire and thread into top of roof (2) - see Drawing 1.

2. Slip candle sleeve (3) over socket (A).

3. Thread stem (C) into base of cluster assembly (B) and tighten.

4. Slip cage assembly (4) onto stem (C) and hold in position.

5. Thread ﬁnial (5) onto end of stem (C) and tighten.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

the main body of the ﬁxture, making all necessary electrical connections, and

then hanging the ﬁxture from the ceiling.

start here

2642

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

1. Please refer to the hanging instruction sheet provided to complete installation

of this ﬁxture.

Drawing 1 - Fixture Assembly

2.7.08

PAGE 1
2642 assembly instructions Family: Bolla Drawing 1 - Fixture Assembly Item No. 2642 s tart he re 1 1. Find a clear area in which you can work. 2 2. Unpack fixture and glass from carton. 3. Carefully review instructions prior to assembly. 3 A B C *** The construction of this fixture will be accomplished by first assembling the the main body of the fixture, making all necessary electrical connections, and then hanging the fixture from the ceiling. 1.
PAGE 2
s tar t he re Drawing 1 - Hanging Assembly A 3c 1 2 SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS. 1. Shut off electrical current before starting. If the fixture you are replacing is turned on and off by a wall switch, simply turn the switch off.
PAGE 3
grounding instructions SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS. Drawing 1 - Flush Mount wiring instructions supply wire A C Indoor Fixtures E 1.