Installation Sheet

UNPACKING YOUR FAN

UNPACK YOUR FAN AND CHECK THE CONTENTS.

hinkley.com

VAIL PACKAGE CONTENT

1 Blade Set of 5

2 Hanging Bracket

3 Ceiling Canopy and Trim Ring

• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.

Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.

• Examine all parts. You should have the following:

NOTE: Design of parts shown above may look slightly diﬀerent for

your speciﬁc model of fan.

Downrod Asm.

Yoke cover

Blade Arm Set of 5

Mounting Plate

16W LED Assembly

Metal cover

Receiver Incl. 5 Wire Nuts

Bracket Mounting Hardware

(wood screws, screws, lock

washers, washers, wire nuts),

Blade to Blade Arm Screws and

Rubber Washers ,

Balance Kit

Wall Control w/12v Battery

Wall Plate, Face Plate,

2 Sets of Mounting Screws,

and Machine Screws

Hardware Bag

Ball Moisture Cover

Fan Housing with Motor

*Remove rubber shipping

supports around motor, if

applicable. Save the screws.