Installation Sheet

INSTALLING THE BLADES

NOTE:

Fasten blade to motor with provided blade support plates and

screws. Repeat procedure for remaining blades. Make sure

screws are TIGHT! Loose motor screws can contribute to

unnecessary hum during operation.

Cordless power screwdrivers are NOT recommended,

as they usually strip the heads of the screws and

usually will not fully compress the lock washers on

the motor screws. Use a large ﬂat blade screwdriver

for ﬁnal tightening to fully compress the washers. This

will help ensure proper alignment of the blades and

noise-free, wobble-free running.

hinkley.com

Screws

Blades

Blade

support

plate