Instructions / Assembly

INSTALLATION THE SWITCH HOUSING AND LIGHT KIT
NOTE: Be sure the power is off before installing.
NOTE: Be sure the power is off before installing.
1. Attach the light kit to the switch housing by feeding
the light kit wires (black and white) through the hole
of switch housing and then screw it onto the switch
housing by nut & lock washer. Be sure it is tight
enough to prevent light kit from vibrating loose.
(Fig. 1)
2. While holding the light kit assembly under your fan,
snap together the wire connection plugs. (Fig. 2)
3. Carefully push all wires back into the switch
housing, then install the light kit assembly onto the
mounting plate with 3 screws provided. Be sure to
tighten all screws.
4. Install 3 x 60W candelabra bulbs (included). (Fig. 2)
5. Remove the metal nut, glass cap and decorative nut
from the light kit. Place globe over the light kit stem,
secure with the metal nut, glass cap and decorative
nut. Do not overtighten. (Fig. 2)
6. Turn the power on. Your Regency Ceiling Fan is now
ready to enjoy!
11
Nut
Switch Housing
Light Kit
Lock Washer
Fig. 1
Fig. 2
Wire Connection
Plugs
Light Kit
Screws
Bulbs
Globe
Mounting
Plate
Metal Nut
Glass Cap
Decorative Nut