Instructions / Assembly

Table Of Contents

UNPACKING YOUR FAN

1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever

necessary, the fan should be returned in original packing. Remove all parts and hardware. Do not lay motor

housing on its side, or the decorative housing may shift, be bent or damaged.

2. Examine all parts. You should have the following:

1. Fan blades (5)

2. Hanging bracket

3. Ceiling canopy

4. Canopy screw cover plate

5. Downrod/ball assembly

6. Coupling cover

7. Fan housing with motor (Remove rubber shipping supports around motor, if included on your fan. Save screws.)

8. Blade arms (5)

9. Switch housing

10. Light kit

11. Globe

12. Pull chains with fobs (2)

13. 60W candelabra bulbs (3)

14. Bracket mounting hardware (wood screws, screws, lock washers, washers, wire nuts)

15. Blade arm to blade screws, w/washers (16)

16. "

16. "S

" hook (

Used for hugger style mounting.)

NOTE:

Design of parts shown above may look slightly different for your specific model of fan.