Installation & Assembly
English Spanish
French
33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500
start here
commencez ici empezar aquí
H
I
N
K
L
E
Y
Drawing 1 - Fixtu re Assembly
R
REQUIRED
LENGTHS
R
R
5
1
2
3
4
*** The construction of this fixture will be accomplished by first
assembling the main body, hanging the fixture, and then installing the
fixture glass.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUC-
TIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER
SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS
REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR LOCAL
AUTHORITIES FOR CODE REQUIREMENTS.
ADVERTENCIA DE SEGURIDAD: LEA LAS INSTRUCCIONES
DE CABLEADO Y CONEXIÓN A TIERRA (I.S. 18) Y CUALQUIER
INSTRUCCIONES ADICIONALES. APAGUE LA FUENTE DE
ALIMENTACIÓN DURANTE LA INSTALACIÓN. SI SE REQUIERE
CABLEADO NUEVO, CONSULTE A UN ELECTRICISTA CALIFI-
CADO OA AUTORIDADES LOCALES PARA LOS REQUISITOS
DEL CÓDIGO.
AVERTISSEMENT DE SÉCURITÉ: LISEZ LES INSTRUCTIONS
DE CÂBLAGE ET DE MISE À LA TERRE (I.S.18) ET TOUTES
DIRECTIONS SUPPLÉMENTAIRES. COUPER L'ALIMENTATION
ÉLECTRIQUE PENDANT L'INSTALLATION. SI UN NOUVEAU
CÂBLAGE EST NÉCESSAIRE, CONSULTEZ UN ÉLECTRICIEN
QUALIFIÉ OU LES AUTORITÉS LOCALES POUR LES EXIGENC-
ES DU CODE.
Drawing 1 - Glass Installation
1. To install glass, first place the wider accent ring (2) and slip it
inside larger outside ring (3). Now lift rings (2) and (3) up to the
fixture body (4) align one set of holes (H) in rings (2) and (3) with
threaded hole (T) in fixture body (4) - see Drawing 2.
2. Now slip threaded stud from decorative knob (5) through holes (H)
in both rings and thread into threaded hole (T) several turns to hold
the rings in position. Repeat process with the remaining three
decorative knobs with studs (5).
3. Prior to install the glass globe (6) fixture can be lamped
accordingly.
4. Now slip glass globe (6) into bottom of fixture body (4). Hold in
position and thread in decorative knobs (5) until they touch the glass.
Making sure end of stud engages glass at the neck (N).
Please Note: all knobs should be hand tightened only. Using any
tools could cause over tightening of knob and damage to glass.
9.9.2020
T
H
N
39054 / 39057
39054 / 39057
39054 / 39057



