User Guide

3.3 Checking Cable Length
26
Cable length is displayed at the bottom right.
3.3 Checking Cable Length
• The wire length of each pair is displayed along
the bottom when an open, short or split pair is
detected, or when a disconnected terminator or
terminator error is detected.
The length of each wire pair may be displayed as
a different value depending on the cable type,
twisted pair condition or measurement accuracy.
The wire length of a split pair may be displayed
as shorter than its actual length (when an imped-
ance mismatch exists).
• The HiTester measures cable lengths from 2 to
300 meters (6.6 to 984 feet). Cable lengths out-
side of this range are not displayed.