User Guide

4.4 Initializing Settings
38
To initialize HiTester settings by the following procedure.
Initialized Settings
• NVP value (Initial setting is "0.684")
• Beeper (Initial setting is "On")
• Measurement Units (Initial setting is "m")
4.4 Initializing Settings
1.
With the HiTester turned on, hold the key for one sec-
ond to display the Settings screen.
2.
Select "Reset ALL" with the S / T keys.
3.
Press the key to display the Confirmation screen,
select "OK" with the S / T keys, press the key again
to accept your setting.
4.
Select "Measurement" with the S / T keys, and press
the key to return to the Test screen.
SE
T
SE
T
SE
T
SE
T