User Guide

7.3 Error Display
50
When an error is displayed, confirm the following contents.
7.3 Error Display
Message Description and Remedy
No Terminator The 9690 TERMINATOR is discon-
nected.
→Connect the 9690 TERMINATOR.
Terminator Error A device other than a 9690 TERMINA-
TOR is connected.
→Connect a 9690 TERMINATOR.
An error exists on all pins.
→Check that the cable is connected
securely.
Memory Error Some data could not be stored or read
correctly.
→Press the key to initialize HiT-
ester settings.
→If the problem is not resolved by ini-
tializing, contact your supplier or
nearest Hioki representative.
System Error The HiTester has internal system dam-
age.
→Contact your dealer or Hioki repre-
sentative.
SE
T