User Manual

Revision 01
6
 SYS, IF
 [RESET] : The settings of the instrument other than the communication settings and panel
are initialized.
 LAN: To change the LAN settings, press [Reflect]. The instrument's LAN settings will not be
changed until [Reflect] is pressed; if a LAN connection has been made, it will be
reconnected.
 Some functions cannot be set from the application.
 INFO
Information on this instrument can be checked.
 Obtains error information from the instrument.
For details on various errors, refer to the
":SYSTem:ERRor?" command page in the instrument's
instruction manual.