User Manual

Revision 01
9
 SETTING
 Graph setting
 Sets the number of waveforms sampled.
 Sets the degree to which sampled waveforms
are thinned out. Larger values result in lower
resolution, but allow acquisition of waveforms of
longer duration.
 The recording time with the above settings is
shown.
 If checked, the voltage and current graphs are
displayed separately.
 BDD setting
Enable BDD setting, set threshold
 CCV: Detects V in CC (charging) state
 CVV: Detects V in CV (steady) state
 CVI: Detects I in CV (steady) state
 When turned ON, the test is stopped when the
BDD count reaches 1 or more.
 TEST
When checked, the test status of this instrument is
monitored; check this box if you want to control the
test with EXT I/O. The operation of this instrument
will not be possible because it will always be in the
remote state (RMT). Uncheck the check box if you
want to operate the instrument.
Displays the test status of the instrument.
IDLE: Waiting
TEST: Testing
DISCHARGE: Discharging
INTERLOCK: Waiting at interlock
Displays measurement results.
Displays the number of BDD
counts and their breakdown.