User Manual

7
______________________________________________________________________
(2) Measuring the RMS Voltage of a 220 V AC Source (RMS Recorder Function)
________________________________________________________________
1. Press the SET key to display the Status screen.
2. Press the SET key to display the Channel screen.
Settings for Channel 1 (CH1)
1. Waveform color
:
optional setting
2. Voltage axis range:
50 V
(Measuredby50Vx10DIV)
3. Zero position:
0%
(Set the bottom of the
screen to 0 V)
SET
DISP
SYSTEM
1
2
3
1. Press the SET key to display the Status screen.
3. Press the SET key to display the Trigger screen.
SET
DISP
SYSTEM
3
Settings for Channel 1 (CH1)
1. Trigger mode:
SING
(single)
(input the waveform once)
2. Trigger source:
OR
3. Trigger type:
OFF
1
2
Trigger setting
When the trigger type is set to OFF, measurement
starts simply by pressing the START key.
1. Press the SET key to display the Status screen.
Start Measurement
Press the START key to st art measurement.
Waveform input starts for the set recording
length. Printing starts at the same time.
STA RT
STOP