User Manual

1.3 Judging Calculation Results
12
Judging Numerical Value Calculation Results
To open the screen: Press the SET key → Select with the SUB MENU keys →Num Calc Settings scree
n
Operating Key Procedure
1
Make settings for calculation (⇒ p. 6).
2
Select the appropriate calculation judgment settings.
SHEET/PAGE
Select the group for which to set calculation judg-
ment. (G1 to G16)
CURSOR
F2
Move the cursor to your setting choice, and se-
lect [Judgment].
3
Enable the judgment function.
CURSOR
Move the cursor to the [Comp] setting for Calcu-
lation No. to judge
F2
Select [On].
4
Specify the judgment thresholds.
CURSOR
Set the [Lower] and [Upper].
F1 to F8
Select an entry method and enter the threshold
values.
Input range: –9.9999E+29 to 9.9999E+29
5
Select the Stop Criteria upon judgment.
CURSOR
Move the cursor to the [Stop Criteria] item.
F1 to F8
Select either choice.
Execute calculation.
Judging Existing Data
CURSOR
Move the cursor to the [Execute] button.
F1
Select [Execute].
When judging automatically after measurement
START
Starts measurement.
3
4
Calculation Type
Judge or not
Lower and Upper judgment
thresholds
Channel for Calculation
Group of Calculation
Calculation No.
Settings can also be made
in a dialog (
⇒ p. 8).
Calculation Setting
Contents
GO Continue to the next process when within
the threshold range (PASS judgment)
NG Continue to the next process when out-
side of the threshold range (FAIL judg-
ment)
GO & NG Continue to the next process regardless of
judgment result.
The upper threshold of the period range
cannot be set below the lower thresh-
old, and vice-versa.
See "3.3.3 Entering Text and Num-
bers" in the Instruction Manual
Processing depends on the Trigger Mode
setting.
If calculating while acquiring waveforms,
measurement is repeated until the Stop
Criteria are met.
5