User Manual

2.2 Settings for Waveform Calculation

Waveform Calculation Results

Operating Key Procedure

(As occasion demands)

Make display settings for waveform calculation results

on the Sheet Settings screen (⇒ p. 33)

Set auto saving and auto printing as needed (Instruction

Manual)

Execute the calculations.

Applying Calculations to Existing Data

CURSOR

Move the cursor to the [Execute] button.

Select [Execute].

To calculate while measuring

START

Starts measurement.

Calculation waveforms are displayed after load-

ing waveforms.

Example: Waveform of the calculated absolute value of the waveform o

CH1-1. Calculation equation = ABS(CH(1,1))

CH1-1 Waveform

Absolute Value

Waveform

To copy settings from one calculation to another

The method is the same as for copying numerical value calculations.

See "Copying Settings Between Calculation Nos." (⇒ p. 10)

To distribute calculation results onto sheets, or to display in separate

Graphs

Display/non-display of calculation waveforms and graph division can be set on

the Sheet Settings screen.

See "2.3 Calculation Waveform Display" (⇒ p. 33)