User Manual

2.3 Calculation Waveform Display

Assignment of calculation results and split-screen graph display arrangement

can be set.

These settings are effective when Waveform Calculation is enabled.

2.3 Calculation Waveform Display

Waveform Calculation Display Settings

To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen

Operating Key Procedure

SHEET/PAGE Select the [Wcal] page.

Select whether to display calculation waveforms.

CURSOR

Move the cursor to the [Unit-Ch] column for the

Calculation No. to be displayed.

F1 to F8

Select the desired calculation equation for dis-

play.

Select a Graph for display.

(when [Split-Screen] is set to [2 Graphs] or more, or the

[Display Type] is set to [Wave+X-Y])

CURSOR

F1 to F8

Move the cursor to [Graph].

Select the Graph number to be displayed.

Graph number samples (G1, G2, ...) are dis-

played at the left side of the screen.

Verify the calculation waveform on the Waveform screen.

DISP

The Waveform screen appears.

Off The calculation waveform is not dis

played.

Z1 to Z16 Displays the selected calculation wave

form.

Z1 to Z16

correspond to the calculation equations

defined on the Waveform Calculation

Setting (Wave Calc) screen.