User Manual
3.2 Screen Organization (FFT Function)
38
3.2 Screen Organization (FFT Function)
Measurement-related settings for FFT analysis are made on the Settings screens (Sta-
tus, Channel, Trigger and Sheet); saving and printing settings are made on the Sav
e
Settings and Print Settings screens; and measurement data display settings are mad
e
on the Waveform screen. The Channel Settings, Trigger Settings, Save Settings an
d
Print Settings screens are nearly the same as for the other operating functions.
3.2.1 Waveform Screen
(To change sheets)
This is valid only when measure-
ment data has been assigned to
multiple sheets.
To open the Waveform screen
Press the DISP key
Press the
SUB MENU keys
(To change choices of setting items)
(The Waveform screen appears)
Press the
SHEET/PAGE keys
Data acquired by the instrument can be dis-
played as any of the following types. The dis-
play type can be selected for each Sheet.
Display type:
• FFT
•Nyquist
• FFT+Nyquist
• Wave+FFT
• Wave+Nyquist
See "3.6 Setting the Screen Layout of the Wave-
form Screen" (
⇒ p. 72)
1
On-screen changes can be
made by clicking the mouse.
Input Channel Settings Dialog
Input channel settings can be changed.
(Appears when you press the UNIT or CH keys,
or press or turn the RANGE knob)
Press the ESC key to remove the dialog.
A/B Cursor Settings Dialog
Select the type of cursors.
(Appears when you press the TYPE key or knob A)
F
unction Menu
S
elect a function before measur-
i
ng.
Internal and Externa
l
Connection Status
Recorded Data
Shows data acquired with this
instrument.
Setting Items and Choices (⇒ p. 39)
Calculation configuration and trigger criteria settings
can be changed. These can be changed while mea-
suring. Press the SUB MENU keys to select the items
to change.
Clock
Shows the current time. You ca
n
change the display appearance.
Setting Choices
The cursor indicates th
e
current setting choice.
Select with F keys (F1 t
o
F8).
Press the FUNCTION
MODE key to change th
e
F key functions.
Status Bar
This bar indicates the current
states of data acquisition, in-
ternal processing, settings
and display information.
“Key Lock” appears whe
n
the key-lock state is en
-
abled.
F-Key Function
Status
Shows the current F ke
y
status.
Sheet No.