User Manual

3.3 Operation Workflow
48
Input Channel Settings
Make settings on the Channel Settings screen.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[One Ch] page
9
Select the Unit (module) and Channel
10
Select the measurement range (vertical axis)
Make input-module-related settings
11
Perform zero adjustment
12
(As occasion demands)
Set the scaling
Trigger Settings
(If you want to record a specific waveform, such as an
anomaly)
Set on the Trigger Settings screen.
Press the SUB MENU keys to select the
menu
13
Set the trigger mode
14
Set the trigger criteria (AND/OR)
15
(As occasion demands) Set pre-trigger
16
Set each trigger source
10
12
9
11
See "3.5 Selecting Channels" (⇒ p. 69)
(after warm-up
)
15
16
13
14
Settings are the same as for the Memory function.
See "Chapter 6 Trigger Settings" in the Instruction Manual
Analog or Logic Trigger
External
Trigger
Timer Trigger
Default setting:
[Auto]
Default setting: [OR]
Default setting: All
[Off]