User Manual

3.4 Setting FFT Analysis Conditions
51
The FFT function can be selected from the Opening, Waveform or Settings
screen.
3.4 Setting FFT Analysis Conditions
1
2
Basic measurement configuration settings are performed on the Status Settings screen. Measurement
configuration can be performed from the Waveform screen (⇒ p. 67).
Open the Settings screen
Menu selection
3.4.1 Selecting the FFT Function
Function Selection: From the Opening Screen
Opening Screen
Operating Key Procedure
1
CURSOR
Move to the desired function.
2
F1 to F8
Select the appropriate function.
F3
Function Selection: From the Waveform or Settings Screen
Waveform Screen
Operating Key Procedure
1
CURSOR
Move to the function menu (at the top left).
2
F3
Select the FFT function.
(Select from the pull-down menu)
SELECT
The pull-down menu appears.
CURSOR
Select the appropriate function.
ENTER
Accepts the setting.
Pull-Down Menu
Function Menus