User Manual

3.9 Analysis with the Waveform Screen
79
3.9.2 Selecting Gauges and Values
FN
1
2
(FN: FUNCTION MODE)
F2
F2
key
Press the FUNCTION MODE key to enable the FN mode, then press F2 [Gauge & Value].
The Gauge dialog appears.
Select an analysis number as occasion demands to display gauge and measurement values.
Press the ESC key or the F8 [Close] key to close the dialog.
Display of upper and lower limits and peak values [maximal/ maximum] can be selected by analy-
sis number. However, selection is not possible when Nyquist display is enabled.
GAUGE&VALUE dialog
Using the CURSOR keys, move the cursor into the dialog and
select the channels for which to display a gauge.
When the analysis number that was se
t
on the Status screen is selected, uppe
r
and lower limits and the local maxima
values are displayed.