User Manual

3.9 Analysis with the Waveform Screen
81
Procedure 1. Verifying the analysis starting point while viewing analysis data
Display the waveform to be analyzed.
Set the analysis input data source to [From
Mem].
Set analysis conditions such as the analysis mod
e
and number of analysis points (these can also b
e
set on the Waveform screen).
1
Select the FFT function (F3 [FFT]) to display the Status Settings
screen.
3
2
Set the display type to [Wave+FFT] o
r
[Wave+Nyquist].
To use split-screen display, set graph assign
-
ments on the [FFT] page.
5
Press the SUB MENU keys to display the Sheet Settings screen.
Press the DISP key to display the Waveform screen.
4
6