User Manual

1.2 Input Module Usage List
10
Current Measurement
Other Measurements
Logic Measurements
To Perform This
Measurement
Recommended
Input Module
Use to connect
Connection
Procedure
Setting
Procedure
Remarks
To read current values di-
rectly without complicated
settings such as scaling
Model 8940 F/V
Unit
Models 3273/ 3273-50
Clamp-On Probe
Models 9270 to 9272
Clamp-On Sensor
Models 9277 to 9279
Universal Clamp-On CT
(⇒ p. 21)
(
⇒ p. 29)
(⇒ p. 50)
A conversion cable is
required for
connection (
⇒ p. 11).
To measure using a
voltage measurement
module
Voltage Measure-
ment Input Module
Models 9018-10/ 9132-10
Clamp-On Probe
Models 3273 to 3276
Clamp-On Probe
Models 9270 to 9272
Clamp-On Sensor
Models 9277 to 9279
Universal Clamp-On CT
(⇒ p. 29)
Refer to the
voltage
measurement
description for
each module
Scaling is required.
Depending on the
clamp, a power supply
or sensor unit may be
required for
connection (
⇒ p. 11).
Overview of the above input modules (⇒ p. 7), about Clamps (⇒ p. 7)
Procedures for settings unrelated to input channels are the same. Refer to the Instruction Manual for details.
To Perform This Measurement Recommended Input Module Use to connect
Connection
Procedure
Setting
Procedure
To measure electric charge, accelera-
tion, pressure, torque or displacement
using a strain sensor.
Model 8939 Strain Unit
Model 8960 Strain Unit
Conversion Cable (sup-
plied) Strain Gauge
Transducer
(⇒ p. 20) (⇒ p. 49)
To measure acceleration Model 8947 Charge Unit Piezoelectric Sensor
(⇒ p. 24) (⇒ p. 57)
To measure frequency
Model 8940 F/V Unit
Models
9198 Connection Cord
9217 Connection Cord
(⇒ p. 21) (⇒ p. 50)
To measure pulse counts (totalization),
pulse duty and similar values
Overview of the above input modules (⇒ p. 8)
Procedures for settings unrelated to input channels are the same. Refer to the Instruction Manual for details.
To Perform This Measurement Recommended Probe
Connection Procedure
Setting
Procedure
To measure digital signals and on/off
switching of non-voltage contacts
Model 9320-01 Logic Probe
(⇒ p. 37), (⇒ p. 39)
(⇒ p. 79)
To measure larger signals than the above Model 9327 Logic Probe
(⇒ p. 37), (⇒ p. 39)
To measure the presence or absence of
AC or DC voltage
Model 9321-01 Logic Probe
(⇒ p. 37), (⇒ p. 40)