User Manual

2.4 Connecting a Differential Probe
33
1 Connect the BNC plug on the probe to a
BNC jack on the input module.
2 Connect the AC adapter to the power jack
on the probe, and plug it into an AC outlet.
3 Connect an alligator clip or grabber clip to
the input lead of the probe.
4 Connect to the measurement object.
Disconnecting BNC connectors
Push the BNC plug, twist it counterclock-
wise, and pull it out.
Required item:
9322 Differential Probe and 9418-15 AC Adapter
BNC jack
Connection Procedure: Measuring voltage with the input module
(using the Model 9418-15 AC Adapter)
Connect to the measurement object
Power jack
Input leads
1
2
3
4
Lock
Input module
connector guide pins
BNC plug slots
BNC connector
Example: Connecting to the Model 8936 Analog Unit
Connect the Model
9418-15 AC Adapter
Connect to an AC outlet
Set the [Probe] selection on the Channel
Setting screen to [1000:1].