Quick Start Guide

Appendix 3 Common Questions
A11
Printing
In this case Description Reference
To add or remove the gauge
in printouts
To print the gauge, select [Gauge] or [List & Gauge] for
the [List & Gauge] setting of the [Print Items] on the Print
Settings screen.
If set to [Off], no gauge is printed. (Default setting: [Off])
"11.6.2 Printing Waveforms" in
the Instruction Manual
The grid appears on the
screen, but doesn’t print
The grid on the printout is independent of the on-screen
grid.
To print the grid, select the Grid Type in the [Waveform
Print Items] on the Print Settings screen [Print Items].
(Default setting: [Normal])
"6.4 To Print a Detailed Set-
tings List" (
⇒ p. 79) in this man-
ual,
"11.6.2 Printing Waveforms" in
the Instruction Manual
To print using a network
printer
Printing to a network printer is not possible.
To print in real time, or to set
real-time printing, but not print
If real-time printing is set to [On] with the Recorder func-
tion, printing is performed while measuring. (only with
the internal printer) However, with the Recorder func-
tion, printing is not available if the recording length is set
to [Cont] (Continuous) and the timebase is set between
10 and 200 ms/div.
Printing is also disabled for the 500 ms/div and 1 s/div
ranges when using the DC power supply and A6 printer.
In these case, print manually after measurement. Up to
5,000 divisions of data recorded prior to stopping
recording is retained internally (when the Model 9715
Memory Board is installed).
"11.3 Making Auto Print Set-
tings" in the Instruction Manual
To stop or restart during real-
time printing
(Recorder function only)
Press the [Print] button on the Waveform screen to stop
and restart printing.
When restarting printing, you can set the number of divi-
sions prior to the current point at which to resume.
"11.3 Making Auto Print Set-
tings" in the Instruction Manual
To print a screen image
(Screen Print)
The procedure is determined by the [PRINT Key Action]
setting on the [Printer] page of the Print Settings screen.
• [Quick Print] case: Set the print type to [Screen
Image], display the screen to print, and press the
PRINT key.
• [Selection Print] case: Display the screen to print,
press the PRINT key and select [Screen Image] from
the [Print] dialog.
"11.4 Making Manual Print
(PRINT Key Output) Settings" in
the Instruction Manual
To print a specified range of
measurement data
The procedure is determined by the [PRINT Key Action]
setting on the [Printer] page of the Print Settings screen.
Before printing, specify the area to print using the A/B
cursors on the Waveform screen.
• [Quick Print] case: Set the print type to [A-B Wave],
and press the PRINT key.
• [Selection Print] case: Press the PRINT key and
select [A-B Wave] from the [Print] dialog.
Specifying a Waveform Area:
"8.7 Specifying a Waveform
Range" in the Instruction
Manual
To print comments
Select [Comments] or [Set & Com] for the Title or Analog
setting items in [Comment Printing Settings] on the [Print
Items] page of the Print Settings screen.
"11.6.5 Printing Comments and
Setting Data" in the Instruction
Manual
To print a list of settings such
as the measurement configu-
ration
(List Print)
The procedure is determined by the [PRINT Key Action]
setting on the [Printer] page of the Print Settings screen.
• [Quick Print] case: Set the print type to [List] and
press the PRINT key.
• [Selection Print] case: Press the PRINT key and
select [List] in the dialog.
"11.4 Making Manual Print
(PRINT Key Output) Set-
tings";"Manual Print [Quick
Print]" in the Instruction Manual