Quick Start Guide

1.2 Measurement Workflow

Operation Overview: Recording Analog Waveforms

For more details, refer to "3.1 Measurement Workflow" in the Instruction Manual.

Also refer to "Appendix 2 Overview of Settings and Functions" (⇒ p. A2) and "Appendix 3 Common Ques-

tions" (⇒ p. A7).

Installation & Connections

Install the input modules and cables required for

measurement (⇒ p. 37).

Refer to the Input Module Guide for details about input mod-

ules and cables.

Power ON

Function Selection

Select the function according to your application.

See "Function Selection" (⇒ p. 29)

• Memory function

To record relatively fast signals from µs to minutes

• Recorder function

To record relatively slow signals at low speeds from ms to

hours

Record instantaneous

waveforms

Long-term measurements

Memory (MEM)

(Sampling point

recording)

Recorder (REC)

(Envelope recording)

Measurement Configuration

Settings

Make settings on the Status Settings screen.

Press the SET key to open the Settings screen

Press the SUB MENU keys to select the

Press the SHEET/

PAGE keys to select

the [Use Ch] page

Verify the channel(s)

to be used

Press the SHEET/PAGE keys to select the

[Basic] page

1 Set the timebase (horizontal axis)

Set the recording length

See"4.2 Setting Measurement Configuration (Status Set-

tings Screen)" in the Instruction Manual