Quick Start Guide

1.2 Measurement Workflow
14
Input Channel Settings
Make settings on the Channel Settings screen.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[One Ch] page
3
Select the Unit (module) and Channel
4
Select the measurement range (vertical axis)
Make input-module-related settings
5
Perform zero adjustment
6
(As occasion demands)
Set the scaling, waveform colors and
zero position
Trigger Settings
(If you want to record a specific waveform, such as an
anomaly)
Set on the Trigger Settings screen.
Press the SUB MENU keys to select the
menu
7
Set the trigger mode
8
Set the trigger criteria (AND/OR)
9
(Memory)
Set pre-trigger
(Recorder)
Set trigger timing
10
Set each trigger source
4
6
3
5
See"Chapter 5 Input Channel Settings" and "7.1 Makin
g
Input Waveform Display Settings (Analog Waveforms
)"
in the Instruction Manual
"Chapter 3 Input Channel Settings" in the Input Modu
le
Guide
(after warm-up
)
9
10
7
8
See"Chapter 6 Trigger Settings" in the Instruction Manual
Analog or Logic Trigger
External
Trigger
Timer Trigger
Default setting:
(Memory)
[Auto]
(Recorder) [Single]
Default setting: [OR]
Default setting: All [Off]