Quick Start Guide

1.2 Measurement Workflow
16
Printing Settings
(If you want to print data)
Set on the Print Settings screen.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[Printer] page
15
Select automatic or manual printing
Press the SHEET/PAGE keys to select the
[Print Items] page
16
Select what you want to print
Start of Measurement
Press the START key (the green LED lights).
End of Measurement
Press the STOP key.
Recording stops after acquiring the specified length
(the green LED goes off).
Press twice to stop immediately.
If [Single] trigger is selected, recording stops automatically
after acquiring the specified data length.
Data Analysis
Analysis on the waveform screen.
See"Chapter 8 Waveform Screen Monitoring and Analysis"
in the Instruction Manual
Optionally save and print
Press the SAVE key to save. (Manual saving)
Press the PRINT key to print. (Manual printing)
Power OFF
Remove the cables from the measurement object,
and turn the power off.
16
See"Chapter 11 Printing" in the Instruction Manual
15
Verify that the paper is
loaded correctly.
When printing manually,
settings can be made after
measurement.
Default setting:
Auto Print
[Off]
Manual Print [Selection
Print]
Data acquisition
Save & Print (when Auto enabled)
Waveform data is erased when power is turned off. However, measurement settings are retained.
To retain waveforms with power off, the optional Model 9719 Memory Backup Unit is required.