Quick Start Guide

1.2 Measurement Workflow
17
Operation Overview: Recording Logic Waveforms
Installation & Connections
Connect the logic probes (⇒ p. 37).
Refer to the Input Module Guide for details about probes.
Power On
Measurement Configuration Settings
Make settings on the Status Settings screen.
Press the SET key.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[Use Ch] page
(With Memory function)
1 Select the channels to use
Press the SHEET/PAGE keys to select the
[Basic] page
2
Select the timebase
3
Set the recording length
Input Channel Settings
Make settings on the [Logic] page of the Channel
Settings screen.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[Logic] page
4
Enable (set to ON) the channels to be displayed
5
(As occasion demands)
Set the waveform display colors
1
S
ee"4.2.1 Selecting Channels to Use" in the Instructio
n
Manual
(With Memory function)
2
3
S
ee"4.2 Setting Measurement Configuration (Status Se
t-
tings Screen)" in the Instruction Manual
4
5
S
ee"7.3.1 Setting the Waveform Display" in the Instructi
on
Manual
Default setting:
[Off]