Quick Start Guide

2.1 Panel Names and Functions
22
SYNC. OUT Jack
Use to synchronize sampling with multiple instruments. ref
(Sample synchronizing signal output)
See "14.2.4 Synchronized Sampling Output (SYNC.OUT)" in the Instruction Manual
EXT SMPL Jack
Sampling can be synchronized by an external signal applied here. (External Sampling)
(Memory function only)
See "14.2.3 External Sampling (EXT.SMPL)" in the Instruction Manual
100Base-TX (RJ45) Jack
Accepts a LAN cable connection. For connection to a network.
See "Chapter 13 Communications Settings" in the Instruction Manual
PS/2 Mouse Jack
A PS/2 mouse can be connected here to control the instrument.
See "3.2.2 Using a Mouse" in the Instruction Manual
PS/2 Keyboard Jack
A PS/2 keyboard can be connected here to control the instrument.
See "3.2.3 Using a Keyboard" in the Instruction Manual
MONITOR Jack
The instrument’s display can be replicated on an external PC monitor connected here. (24
-
pin analog RGB)
External I/O Terminal Strip
These terminals provide and accept external input and output control signals.
See "Chapter 14 External Control" in the Instruction Manual
USB Port
The optional Model 9716 FD Drive or a commonly available USB mouse, keyboard o
r
memory device can be connected here.
See Mouse and keyboard connection: "3.2 Before Operating" in the Instruction Manua
l
Model 9716 FD Drive connection: "10.1.3 Using a Floppy Disk" in the Instruction
Manual
Connectors