Quick Start Guide

2.2 Screen Types and Contents
24
Settings Screen
Press the SET key.
SET
Displays screens for making various operation-related settings such as for measurement, data saving,
printing and calculations. Select the particular settings screen from the Settings menu. Settings menu
contents are function-dependent. Some Settings screens include multiple Settings pages.
Page
Press the SHEET/PAGE keys to select a page.
Settings Menu
Press the SUB MENU keys to select a Settings screen.
Function Menu
Status Settings Screen
([Basic]/[Use Ch]* Page)
Make basic settings here, such as the timebase
and recording length. You can specify which chan-
nels to use.* (* Memory function only)
About screen contents:
"2.5.1 Status Settings Screen" in the Instruction
Manual
Channel Settings Screen
([One Ch], [Comment], [All Ch], [Scaling],
[Variable] and [Logic] pages)
Set the measurement range, scaling and input
waveforms for input channels.
About screen contents:
"2.5.2 Channel Settings Screen" in the Instruction
Manual
Trigger Settings Screen
([Analog] and [Logic] pages)
Set trigger criteria when using a trigger event for
measuring.
About screen contents:
"2.5.3 Trigger Settings Screen" in the Instruction
Manual
Sheet Settings Screen
([Analog], [Logic], [X-Y Comp] and [Wcal]* pages)
Set the Waveform screen layout and Sheet set-
tings. (* Memory function only)
About screen contents:
"2.5.4 Sheet Settings Screen" in the Instruction
Manual
Measurement Configuration and Screen Display Settings
For details of screen contents: "2.5 Settings Screen" in the Instruction Manual
SUB MENU