Quick Start Guide

2.2 Screen Types and Contents
30
Viewing Recording Data (Waveform Screen)
Waveform
Data acquired with this in-
strument can be displayed
as waveforms or numerical
values.
To display as numerical
values:
"8.13 Viewing Waveform Data
as Numerical Values" in the
Instruction Manual
A/B Cursors
Move the cursors using the
A/B knobs
(⇒ p. 63).
A/B Cursor details:
"8.8 Cursor Values" in the
Instruction Manual
A/B Cursor Values
Appear when the A/B cu
r-
sors are displayed. Numer
i-
cal calculation results an
d
channel information can b
e
displayed.
To change the informatio
n
display:
Press the DISP key repea
t-
edly to switch betwee
n
waveform, information an
d
gauge displays. (⇒ p. 63)
Time Value Display
To change the display type:
"12.1.3 Selecting the Time Value Display" in the
Instruction Manual
Trigger Mark
The trigger mark appears
at the point where a trigger
is applied.
Scroll Bar
Shows the range and position of the displayed
waveform.
Viewing the Scroll bar:
"8.1 Scrolling Waveforms" in the Instruction Manual
Status Bar (Waveform Screen)
Display Info
Shows the sheet number of the displayed waveform.
Internal Processing
Status
Shows the states of data ac-
quisition and internal process-
ing.
Trigger Info
Shows the trigger
source and the date and
time of triggering.
Setting Info
Indicates the setting states of Auto
Save, Auto Print and A/B Cursors.
Peripheral Device Setting
Info
Icons indicate when PC Cards
have been inserted, when con
-
nected to peripheral devices,
and which internal devices are
present.
Number of Data Acquisitions
Shows the number of times data has been ac-
quired since the START key was pressed to
start measuring.
Sub Message
Shows the estimated time to
finish storing.
This bar indicates the current states of data acquisition, internal processing, settings and display in
-
formation. For details about each indicator, refer to "Appendix 1 Waveform Screen Display & Icons
"
(⇒ p. A1) in this manual and "2.4 Waveform Screen" in the Instruction Manual.