Quick Start Guide

2.3 Basic Operations
32
You have two ways to change settings.
This document describes how to change settings using the F keys.
In addition to the operating keys, operations can be performed using a mouse or
keyboard.
Refer to "3.2.2 Using a Mouse" and "3.2.3 Using a Keyboard" in the Instruction
Manual.
Initialization and Default Settings
Each item of waveform data and setting data can be initialized.
See "12.3.2 Initializing Waveform Data"
"12.3.3 Initializing System Settings (System Reset)"
"Appendix 2.1 List of Default Settings"
in the Instruction Manual
2.3 Basic Operations
2.3.1 To Change Settings
F Keys
Setting Items
Setting items appear at the right side o
f
the screen (GUI area).
Select using
F1 to F8.
When
[Page] appears at F8:
more selections are available.
Press the F8 key to see the additional
selections.
Selecting with an F key (F1 to F8)Moving to a Selection
Select from a Pull-Down Menu
Move the cursor to setting
item.
Pull-Down Menu
ENTER key
SELECT key
CURSOR keys
Opens the pull-down menu.
Select a setting item.
Applies the setting.