Quick Start Guide

3.2 Connecting Cables and Probes
41
Applicable Input Modules
Model 8947 Charge Unit
Use to connect: Acceleration Sensor or Connection Cable
* Not available from Hioki
Preamp: Preamplified acceleration sensor*
(BNC plug, operating power 2 mA @ 15 V)
Charge: Charge-output type acceleration sensor*
(Miniature #10-32 connector)
Voltage Measurement: Model 9198 Connection Cord
(recommended)
Measuring Vibration using Piezoelectric (Charge- or Preamp-type) Sensors
Preamp
Connect to the BNC jack on an input mod-
ule.
Charge
Connect to the miniature receptacle on the
input module.
Connection Procedure:
"2.2.6 Connecting to the Model 8947
Charge Unit" in the Input Module Guide
Use to connect: Logic Probe
• Model 9320-01 Logic Probe
• Model 9321-01 Logic Probe
• Model 9327 Logic Probe
LOGIC Receptac
les
Measuring Logic Signals
Connection Procedure:
"2.6 Connecting Logic Probes" in the Input
Module Guide