Quick Start Guide

3.3 Loading Recording Paper (With a Printer Module Installed)
43
Loading Recording Paper in the Model 8995 A4 Printer Unit
Retainer
Print Roller
Back Side of
Recording Paper
Paper Roll
Holders
Stock Cover
1 Pull the knob to open the stock cover.
2 Pull the head-raising lever forward.
The print head is separated from the print roller.
(Head-raised condition)
3 Put the paper roll holders in the ends of the
paper roll, and place it in the retainers.
4 Insert the paper through the slot under the print
roller, and pull the paper out so that the print
roller turns.
5 Align the edge of the paper that you pulled out
with the edge of the paper still on the roll.
If the paper is misaligned, it will crease as it feeds.
6 Return the head-raising lever to the lowered
position.
The print head should rest on the paper. (Head-low-
ered condition)
7 Insert the paper through the paper outlet in the
stock cover, and pull a little out.
8 Close the stock cover and cut the paper using
the cutter at the paper outlet to finish the proce-
dure.
Head-Raising Lever
Head-Raising
Lever
2
1
Print Roller
Knob
Paper Cutter