Quick Start Guide

4.2 Operation Workflow
50
4.2 Operation Workflow
Recording
Select with the SUB MENU keys
Settings
Set measurement configuration
Set up input channels
Load setting data (⇒ p. 74)
Set trigger criteria
Print (⇒ p. 75)Save (⇒ p. 65)
Analyze
FILE key
START key
Waveform Screen
Select a Function
Settings Screen
File Screen
SET key
Waveform Screen
Range can be set auto-
matically. (
⇒ p. 51) *1
Regular Recording
Record Specified Waveform (per trigger criteria)
Trigger criteria met
STOP key
Setting data can be loaded automatically. *2
Installation & Connections
"Chapter 3 Measurement Preparations" (⇒ p. 37)
"Chapter 10 Saving/Loading
Data & Managing Files" in the
Instruction Manual
"Chapter 11 Printing" in the
Instruction Manual
• "Chapter 8 Waveform Screen
Monitoring and Analysis" in the
Instruction Manual
• Analysis Supplement
Trigger mode:
[Auto]
Settings for saving *3
Settings for printing *3
Set the screen layout of the
Waveform screen
Trigger criteria met
(Auto)
Trigger mode: [Single]
Trigger mode: [Repeat]
Record Once Record Repeatedly
Turn Power On
(Awaiting trigger)
STOP key
*1. To enable automatic setting: "3.3.5 Automatic Range Setting (Auto-Ranging Function)" in the Instruction Manual
*2. To load settings automatically:
"10.5 Saving & Loading Auto Settings File (Auto Setup Function)" in the Instruction
Manual
*3. When saving or printing automatically, execution timing depends on the function.
When saving or printing manually, settings can be changed after measurement.
Finished Recording
Recording Starts
Recording Starts
Start Recording
Measure with New Settings Measure with Existing Settings
Set as occasion demands.
Analysis, Saving &
Printing