Quick Start Guide

4.4 Actual Measurement and Analysis
55
1
Connect the cable to a BNC jack
on the Model 8936 Analog Unit.
Connect the cable clips to the AC
power line.
1. Measurement Preparations
UNIT 1
See "Chapter 3 Measurement Preparations" (⇒ p. 37), and "Chapter 2 Connections" in the Input Module Guide
This example uses channel
1 (Ch 1).
Right Side
Left Side
Turn the power on.
23
4
1
Connect the power cord from
this instrument to an outlet.
Make sure the power switch is
turned off.
2
8936
CH1
4
9198 Connection
Cord
3
Twist clockwise to lock.
Insert a PC Card into PC CARD
Slot 1.
PC CARD Slot
No preparation is required when using the optional hard disk.
Verify that write protection on the storage media is disabled.
Preparations for Data Saving and Loading
Using a PC Card Using an MO disk
(Using an internal MO unit)
USB Port
Model 9717 MO Unit
To save or print automatically, be sure to prepare the required devices before measurement.
In this case, insert a PC Card into PC CARD Slot 1.
Connect the drive to the USB
port, and insert storage media.
(Example: Model 9716 FD Drive)
Using a USB storage media
drive
Insert an MO disk into the MO
disk slot.
Verify that the paper is loaded correctly.
Using the internal printer: "3.3 Loading Recording Paper (With a Printer Module Installed)" (⇒ p. 42)
Using an external printer: Connect to the USB port and load paper.
Printing Preparations