Quick Start Guide

4.4 Actual Measurement and Analysis
59
6. Enable Auto-Save
Check This! [On]
(default setting)
Trigger date and time are
automatically added as a
prefix to the specified sav-
ing name.
“Time_Date_Saving Name”
(default setting)
Select “Text” to make
the file readable on a
PC.
3 Set Auto Save [On].
4 Select the saving destination.
At [Save in 1], press the F1 key to ope
n
the [Browse Folders] dialog.
The waveform can now be saved with oth
er
settings in their default states. Change thes
e
settings as occasion demands.
See "10.3 Saving Data"
"10.3.4 Setting Auto Save"
"10.3.7 Automatically Saving Waveforms"
in the Instruction Manual
8860
Supplement
• Using Auto Save, waveforms, numerical calculation
results and screen image can be saved at the same
time.
• When the [Save in 1] storage media becomes full, sub-
sequent recording data can be stored on [Save in 2]
storage media. (
⇒ p. A10)
• If the [Save Method] setting is [Normal Save] (default
setting) and the storage media becomes full, an error
message appears. Stop measurement and change the
storage media.
1 Press the SUB MENU keys to select the [Save] menu item.
What about these situations?
To record over a long period
Use high-capacity storage media.
Specify a folder other than the root directory as the save destination. When
more than 5,000 files have been created in one folder, a new folder is automat-
ically created and saving continues.
To continue saving even when the storage media becomes full, select [Delete
Save] as the [Save Method]. When the storage media becomes full, the oldes
t
file is deleted and saving continues.
See "10.3.4 Setting Auto Save" in the Instruction Manual
To also print automatically
On the Print Settings screen, set Auto Print [On]. Every time a waveform is ac-
quired, it is saved and printed.
See "Chapter 11 Printing" in the Instruction Manual
Verify once again before starting measurement.
• Are connections made correctly?
• Is write-protection on the storage media disabled?
• Is storage media inserted?
See "Chapter 10 Saving/Loading Data & Managing Files" in the Instruction Manual
Now use the CURSOR keys to mov
e
among the setting items, and press th
e
F1 to F8 keys to select the desired se
t-
ting.
CURSOR: Selects the storage
media.
Select [PC Card #1] (PC Card Slot 1).
To navigate the tree, press CURSOR
.
2 Press the SHEET/PAGE keys to
select the [Auto Save] page.