Quick Start Guide

4.4 Actual Measurement and Analysis

9. Analyze Data

What about these situations?

To measure with changed set-

tings

After changing settings on the Waveform or Settings screen, press the START

key.

To load saved data from stor-

age media

Press the FILE key to display the File screen, and select the file to load.

See "10.4 Loading Data" in the Instruction Manual

To print recorded waveforms

or settings

Make the appropriate settings on the Print Settings screen, and press the

PRINT key.

See "6.3 Manual Printing (PRINT Key)" (⇒ p. 78) in this manual,

"11.4 Making Manual Print (PRINT Key Output) Settings" in the Instruction Manual

To save settings

Press the SAVE key and select [Settings] to choose the save type, and save.

By saving settings, you can reload them later when you want to repeat measure-

ment with the same settings. Saved settings can also be automatically reloaded

when power is turned on.

See "5.5 Data Saving" (⇒ p. 71) and "5.6 Data Loading" (⇒ p. 74) in this manual

To use recorded data on a PC

Select the waveform or display the image type, and save it.

For details about data saving types, refer to "5.3 Data that can be Saved &

Loaded" (

⇒ p. 68)

Use the LAN interface to connect to a PC.

See "Chapter 13 Communications Settings" in the Instruction Manual

Time from Trigger Event

Trigger Event TimeNumber of Waveform

Acquisitions

Name of Currently Displayed Sheet

See "Chapter 8 Waveform Screen Monitoring and Analysis" in the Instruction Manual

Displayed Channel

Trigger Event Position