Quick Start Guide

4.4 Actual Measurement and Analysis

1 Specify the section to print using the vertical o

trace cursors.

See"Viewing Measurement Values" (⇒ p. 63)

10. Printing a Selected Waveform Section

See "Chapter 11 Printing" in the Instruction Manual

2 Press the PRINT key.

The [Print] dialog appears.

3 Press the F2 [A-B Wave] key.

The specified section is printed.

This procedure describes Selection Printing (default setting).

Function, Timebase

Upper Limit of Display Area

Trigger Mark

Unit-Channel Number

Lower Limit of Display Area

Supplement

To print items other than waveforms such as a settings

list, gauge and upper and lower limits, select which items

you want to print on the [Print Items] page.

See "6.4 To Print a Detailed Settings List" (

⇒ p. 79)

Set the number of cursors to [2].

Channel Settings