Quick Start Guide

Safety Information

This manual contains information and warnings essential for safe operation of

the instrument and for maintaining it in safe operating condition. Before using it,

be sure to carefully read the following safety precautions.

The following symbols in this manual indicate the relative importance of cautions

and warnings.

Safety Information

This instrument is designed to comply with IEC 61010 Safety Standards,

and has been thoroughly tested for safety prior to shipment. However, mis-

handling during use could result in injury or death, as well as damage to

the instrument. Be certain that you understand the instructions and pre-

cautions in the manual before use. We disclaim any responsibility for acci-

dents or injuries not resulting directly from product defects.

Safety Symbols

In the manual, the symbol indicates particularly important information that

the user should read before using the instrument.

The symbol printed on the instrument indicates that the user should refer

to a corresponding topic in the manual (marked with the symbol) before

using the relevant function.

Indicates a burn hazard if touched directly.

Indicates DC (Direct Current).

Indicates AC (Alternating Current).

Indicates both DC (Direct Current) and AC (Alternating Current).

Indicates a grounding terminal.

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

Indicates that incorrect operation presents an extreme hazard that

could result in serious injury or death to the user.

Indicates that incorrect operation presents a significant hazard that

could result in serious injury or death to the user.

Indicates that incorrect operation presents a possibility of injury to the

user or damage to the instrument.

Indicates advisory items related to performance or correct operation

of the instrument.