Quick Start Guide

5.1 Recording (Storage) Media
66
5.1 Recording (Storage) Media
Storage Media Remarks and Hioki Options
Storage Media Designation
(when specifying the storage
media type)
PC Card
(Built-in slots provided)
• Model 9626 PC CARD 32M
• Model 9627 PC CARD 64M
• Model 9726 PC CARD 128M
• Model 9727 PC CARD 256M
• Model 9728 PC CARD 512M
• Model 9729 PC CARD 1G
Insert in a PC CARD slot on the right side of the instrument.
(⇒ p. 67) (Two slots are provided)
PC CARD #1 (PC CARD Slot 1) *
2
PC CARD #2 (PC CARD Slot 2) *
2
MO Disk
Model 9717 MO Unit *
1
(Compatible MO disks: 3.5-inch, with capacity of 128, 230,
540 or 640 MB, and 1.3 or 2.3 GB)
See "10.1.2 Using an MO Disk" in the Instruction Manual
MO (with internal Model 9717 MO
Unit installed) *
2
Floppy Diskette
Model 9716 FD Drive
(Compatible floppy diskettes: 3.5-inch, 2-HD or 2-DD, with
capacity of 720 KB or 1.44 MB)
See "10.1.3 Using a Floppy Disk" in the Instruction Manual
FDD #1, FDD #2, …, FDD #5
(using the Model 9716 FD Drive) *
2
Hard Disk
Model 9718 HD Unit *
1
(Capacity: 60 GB)
See "10.1.4 Using a Hard Disk" in the Instruction Manual
HDD
(USB drives)
Commonly available USB memory or other USB storage de-
vices can be connected to the USB port.*
4
See "10.1.5 Using USB Memory Devices" in the
Instruction Manual
USB DISK #1, USB DISK #2, ... ,
USB DISK #5
(Networks)
Data can be transferred directly to and from PCs over a net-
work.
See "Chapter 13 Communications Settings" in the
Instruction Manual
NETWORK #1, NETWORK #2, ... ,
NETWORK #10 *
3
For details about saving and loading: "Chapter 10 Saving/Loading Data & Managing Files" in the Instruction Manual
For details about inserting storage media and connecting drives:"Preparations for Data Saving and Loading" (
⇒ p. 55)
*1. Either the Model 9717 MO Unit or 9718 HD Unit may be installed. Both cannot be installed together.
*2. Displayed when storage media is inserted.
*3. Displayed when connected to a network with sharing enabled.
*4. Not all commonly available media drives are supported.
When using a USB memory device:
Do not remove the USB memory device while it is being accessed (writing or reading).
Also, immediately after saving data and before removing it, verify on the File screen that the data has been saved.
No particular instrument operation is required to remove a USB memory device.
Be sure to read the above references regarding handling of each type of storage
media.
If damage occurs to the hard disk or internal memory, we cannot restore or ana-
lyze the lost data. We therefore recommend maintaining a backup of any impor-
tant data.