Quick Start Guide

6.2 Printing While Recording (Auto Print)
77
6.2 Printing While Recording (Auto Print)
Enable Auto Print
Use the same settings to also
print numerical calculation re-
sults. (Memory function only)
1 Press the SUB MENU keys to select the [Print] menu.
2 Press the SHEET/PAGE keys
to select the [Printer] page.
Now use the CURSOR keys to move among th
e
setting items, and press the F1 to F8 keys to sele
ct
the desired setting.
3 Press the F2 [On] key.
Memory function and FFT function: Auto Print
Recorder function: Real-Time Printing
4 Select the printing destination.
(Memory function and FFT function only)
Make other printer settings as occasion demands.
See "11.5 Making Printer Settings" in the Instructio
n
Manual
Printer
Print using the internal printer.
USB
Print using an external printer. (only HP
printers are supported)
See "11.3 Making Auto Print Settings" in the Instruction Manual
Selecting Items to Print
You can select what infor-
mation prints on waveform
graphs (⇒ p. 79).
1 Press the SHEET/PAGE keys to
select the [Print Items] page.
2 Select the recording format for the printer.
3 Select the area to be printed.
4 Select the horizontal axis value (timebas
e
display).
Make other changes to waveform, numerical value, com
-
ment settings as occasion demands (⇒ p. 79).
Waveform, Numeric, Screen Link (Default setting)
With [Screen Link], the printout corresponds to actual dis-
play appearance.
Whole (Default setting) or A-B
[A-B] prints the data between A/B cursors.
Time
Time from trigger event (units are
fixed) (Default setting)
Mod 60
Time from trigger event (units are mod
-
ulo 60)
Scale
Number of divisions from trigger even
t
Date
Time of waveform acquisition
Samples
Number of samples from trigger event
S
ee "11.6 Setting the Print Content" in the Instruction Manual
Start Measurement: Press the START key.
Data automatically prints after acquisition by the
instrument.
Comments and settings
data can be printed at
the same time (⇒ p.
Now use the CURSOR keys to move among the se
t-
ting items, and press the F1 to F8 keys to select th
e
desired setting.