Quick Start Guide

6.3 Manual Printing (PRINT Key)
78
The [Selection Print] method is described here. To use the [Quick Print] method, refer to "11.4 Making
Manual Print (PRINT Key Output) Settings" in the Instruction Manual.
6.3 Manual Printing (PRINT Key)
Select when printing a
screen image.
3 Select the printing destination.
4 Press the F2 [Selection Print] key.
Change items to print as occasion demands on the [Prin
t
Items] page (⇒ p. 77).
Printer
Print using the internal printer.
USB
Print using an external printer. (only HP
printers are supported)
1 Press the SUB MENU keys to select the [Print] menu.
5 Press the PRINT key.
The [Print] dialog appears.
Now use the CURSOR keys to move among the se
t-
ting items, and press the F1 to F8 keys to select th
e
desired setting.
2 Press the SHEET/PAGE keys to
select the [Printer] page.
6 Press the F1 to F8 keys to select what you want to print.
The selected items are printed.
*1. Memory function and Recorder function only.
*2. Memory function only.
Whole Wave
Prints all waveform data acquired by the instrument.
A-B Wave *1
Prints the section of the waveform demarcated by the A/B cur
-
sors (vertical or trace cursors). When either of the A/B cursors
is off the screen, the section between A-B cursors is printed.
Before selecting: Specify the print area with the A/B knobs
.
Starting and ending points can be represented by either cursor
.
Trig Wave *1
Prints 10 divisions of the waveform before and after the centra
l
trigger event.
Report
Prints the waveform data of the displayed area on the wave
-
form screen, upper and lower limits and analog channel set
-
tings.
List
Prints a list of the settings on the Settings screen.
Calc Results *2
Prints numerical calculation results.
Screen Image
Prints a captured image of the displayed screen.
Before selecting: Display the screen to be printed.
Feed
Feeds the paper.
Cancel
Cancels printing
Want to stop printing?
Press the STOP key.
To print numerical data:
On the [Print Items] page,
set the [Printout Type] to
[Numeric]