Quick Start Guide

6.4 To Print a Detailed Settings List
79
6.4 To Print a Detailed Settings List
When printing waveforms [Waveform Print Items]
1
2
3
4
5
6
7
(Default setting
)
Setting Item Selection Description
1
Grid Type
Off, Normal, Fine,
Normal (Dark),
Fine (Dark),
Time Axis or
T-Axis (Dark)
Select the type and darkness of the
printed grid.
2
Channel Markers
Off, Ch No. or
Comments
Select whether to print channel number
s
or comments with waveforms. (Analog
channels only)
Marker Position
Inside or Outside Select the channel marker position.
3
List & Gauge
Off, List, Gauge or
List & Gauge
Select whether to print a list or gauge.
4
Upper/Lower
Limits
Off or On
The upper and lower limits of each chan
-
nel can be printed. When scaling is en
-
abled, the limit values are in scaled
units.
5
Zero-Position
Comment
Off or On
Select comment printing at the zero po
-
sition of each channel. (Analog channel
s
only)
6
Counter Printing
Off, Date or Name
Select whether to print the number of ac
-
quired waveforms or counter name. Thi
s
is convenient for distinguishing simila
r
waveforms.
7
Mag/Comp
Screen Link or
No Screen Link
The time axis of waveforms to be printed
can be expanded or compressed
.
(When [No Screen Link] is selected
,
screen expansion and compression set
-
tings do not affect printouts)
See "11.6.2 Printing Waveforms" in
the Instruction Manual
When printing numerical values [Numerical Value Print Items]
(Default setting
)
Setting Item Selection Description
Thinning
Screen Link or
No Screen Link
When data is displayed with numerica
l
values on the Waveform screen, selec
t
whether the thinning setting is linked to
the screen.
See "11.6.3 Printing Numerical Value
Displays" in the Instruction
Manual
When printing comments [Comment Printing Settings]
1
2
3
(Default setting
)
Setting Item Selection Description
1
Title
Off, Settings,
Comments,
Set& Com
Select whether to print a title and settings
data (Function, Timebase, Time Axis
Magnification Ratio, Trigger Time).
2
Analog
Off, Settings,
Comments,
Set& Com
Select whether to print comments for each
analog channel, or channel settings (mea-
surement range, vertical axis expansion
or compression, zero position, low-pass
filter, full-scale value of range [or upper
and lower limits when Variable is en-
abled]).
3
Logic
On or Off
Select whether to print comments for each
logic channel.
See "11.6.5 Printing Comments and
Setting Data" in the Instruction
Manual