Quick Start Guide

Operating Precautions
5
Follow these precautions to ensure safe operation and to obtain the full benefits
of the various functions.
• Before using the instrument the first time, verify that it operates normally to
ensure that the no damage occurred during storage or shipping. If you find
any damage, contact your dealer or Hioki representative.
• Before using the instrument, make sure that the insulation on the probes and
connection cords is undamaged and that no bare conductors are improperly
exposed. Using the instrument in such conditions could cause an electric
shock, so contact your dealer or Hioki representative for replacements.
Operating temperature and humidity: 0 to 40°C at 20 to 80% RH (non-conden-
sating)
However, the operating temperature range may depend on the options used.
Temperature and humidity range for guaranteed accuracy:
23±5°C, 20 to 80%RH
Operating Precautions
Before Use
Instrument Installation
Operating Conditions Operating Temperature
While changing the battery in the Model 9719 Memory Back-
up Unit
10 to 40
°C
While using the Model 8995 A4 Printer Unit, 8995-01 A6
Printer Unit, 9716 FD Drive or 9718 HD Unit
5 to 40
°C
Model 9717 MO Unit 5 to 35
°C
Avoid the following locations that could cause an accident or damage
to the instrument.
Exposed to direct sun-
light
Exposed to high tem-
perature
In the presence of cor-
rosive or explosive
gases
Exposed to liquids
Exposed to high hu-
midity or condensa-
tion
Exposed to strong
electromagnetic fields
Near electromagnetic
radiators
Exposed to high lev-
els of particulate dust
Subject to vibration