Quick Start Guide

7.2 Cleaning
86
1 Moisten the back side of a piece of printing
paper with undiluted alcohol, and insert it into
the printer. If the front side is moistened, it
becomes discolored.
2 Lower the head-raising lever, and wash the
head by sliding the paper back and forth.
Back Side of
Printing Paper
Washing the Print Head
Be careful not to apply too much undiluted alco-
hol.
About the Print Head
To avoid discoloring or deforming the instrument, observe the following precau-
tions:
• Do not use organic solvents such as thinner or benzene
• After washing, allow the printer to dry completely before use.
About the Roller Surface
• White powder such as paper dust may accumulate on the roller surface after
long-term use. A small amount should have no effect on printing, but can be
removed with a commonly available camera blower brush if it causes concern.
• Always use the paper cutter on the printer’s cover to cut the printed paper.
Excessive paper dust can accumulate on the roller if the paper is cut by the
print head.